How does AR2810 provide local authentication for telnet users when radius cannot be used?
1. Set master/slave authentication server. Backup server is local address of the router 127.0.0.1. Telnet users does not need accounting, set accounting optional. vrp3.4 0013 is accounting under default. The key is plain text.
radius scheme system
primary authentication 22.214.171.124 1645
secondary authentication 127.0.0.1 1645
key authentication 123456
2. Set designated IP communicating with Radius on AR. Loopback address can be used. The IP should be the same as that on Radius:
radius nas-ip 126.96.36.199(designated IP on radius)
3. Set IP and ley of local server. The key is the same as authentication key of scheme. Under default local-server is not set.
local-server nas-ip 127.0.0.1 key 123456