No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Knowledge Base

FAQ-How to Ensure VRRP Switchover in Bearer Network

Publication Date:  2012-07-27  |   Views:  151  |   Downloads:  0  |   Author:  Wang Yonggang  |   Document ID:  EKB0000244955

Contents

Issue Description

Q:
IP bearer network often uses VRRP to connect softswitch device. The minimum interval of VRRP sending packet is 1S. If the packet is not received in three times, it will switch over VRRP state. The switchover time is about 3S. For the voice and signaling service of softswitch, 3S is not enough. How to ensure VRRP rapid switchover?

Alarm Information

Null

Handling Process

A:
VRRP can trace BFD Session to realize master/backup switchover.
Realization: BFD session is set up with VRRP interface address between Master and Backup. Trace BFD Session in VRRP configuration.
Detailed configuration: vrrp vrid 1 track bfd-session 2 increased 40  // vrrp group one traces bfd-session 2. If BFD Session state is Down, VRRP priority of Backup increases 40 and changes as master. Rapid switchvoer is realized.

Root Cause

Null

Suggestions

The source address and destination address of BFD must be in routing table of public network. Interface address of VPN cannot realize it.