How to output debug information of NE40 to hard disk log?
1. Enable the following command:
info-center source default channel 9 debug state on
By default debug information output to channel 9 of hard disc is closed and the level is high. Enable the command above and set the lowest level.
If the channel information is as follows, it can output to hard disc:
[Quidway]disp channel 9
channel number:9, channel name:channel9
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y debugging Y debugging Y debugging
The main task of information center is to output three types of information of each module to ten information channels based on user's setting in accordance with eight important levels and then locate ten information channels six output directions. The user can flexibly set the output of related information.