Version 5.30-0238.03, we wanted to get the logfile of NE80 through FTP but even after configuring all the parameters like username and password, ftp directory and enabling the ftp server, the ftp fails.The error message we were getting was "user rejected vy ftp server".
In this configuration, under the domain default, we had defined the authentication scheme as huawei which is for telnet users who will get authenticated by the radius server. Because of this configuration, the ftp user was rejected by NE80 because each time when we ftp and put the username and password as 8011, because of the configuration under domain default that the users will get authenticated by the radius server, the ftp users was getting rejected.
After analysis, for ftp we removed the configuration under domain default,
undo authentication-scheme huawei
and then we were able to ftp successfully.
the configuration of NE80 was as follows:
ftp server enanble
radius-server template huawei
radius-server shared-key ******
radius-server authentication 10.10.10.10 1811
radius-server retransmit 2
undo radius-server user-name domain-included
local-user 8011 password simple 8011
local-user 8011 level 3
local-user 8011 service-type ftp
local-user 8011 ftp-directory hd:
authentication-mode radius local