When is load the IPv6 mode version of paf.txt and license.txt file in a NE40 router running the VRP Version 5.30 if the router uses some LPUF the subcards install in this LPUF can’t be mixed.
SRM/1/Reset:Slot1 is reset, the reason is:The System is in IPV6 mode,SubCard can not be mixed!.
To solve this situation is recommend load the IPv6 disable mode paf.txt and license.txt files.
The problem is use different subcards in the same LPUF when is running IPv6 mode in the router.
In one LPUF cant be a Ethernet card and a Serial card or Ethernet and ATM, but is compatible use in the same LPUF for example a Gigabit Ethernet and an Ethernet card because both are Ethernets cards or use in the same LPUF a POS and T3 board because both are serials.