No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Knowledge Base

FAQ-How to Check When the TL1 Command from the Oss System to the N2000BMS Fails to Run

Publication Date:  2019-07-04  |   Views:  263  |   Downloads:  0  |   Author:  Yu Xianglong  |   Document ID:  EKB0000329270

Contents

Issue Description

Q:
How to check when the TL1 command from the oss system to the N2000BMS fails to run?

Alarm Information

Null

Handling Process

A:
Step 1: Check whether the TL1 command is correct.
Step 2: Check whether the corresponding NMS process of the TL1 command is open.
Step 3: Check whether implementing the same service deployment in the NMS is successful.
Step 4: SSH to the designated port of the NMS and run the TL1 command.
Locate the problems through the previous four steps.

Root Cause

Null

Suggestions

Null