Customer want to test the connection between EGS4 card and Router using ping method, as the SFP module provided by customer is different from the original one on the EGS4 card( but the same with the one on the Router). There is 1 EGS4 card, 1 EFS0 card(with ETS8 as interface card) and 1 SLQ1 card free on te OSN3500 node. We expected to ping the Router which connected with EGS4 card using our laptop connected with ETS8 card.
In this test, we used one SLQ1 card as a media to make Ethernet service on the same node and make the test smoothly.
1) we tried to do the cross-connection between the two Ethernet cards(EGS4 and EFS0) but failed, as the equipment doesn't support cross-connection directly on the same node.
2) we tried to make cross connection between the two Etherent cards and the SLQ1 card (port 3 and port 4, respectively), and created Ethernet service based on them.
3) Connect the fiber between port 3 and port 4 of SLQ1 card;
4) Ping the Router which connected the EGS4 card with laptop connected with ETS8 card and succussful;