No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FAQ-How to Configure and Modify the Rate of Serial Port for the Solaris10 Server

Publication Date:  2012-07-25 Views:  98 Downloads:  0

Issue Description

When performing management on the N2000 BMS through modem remotely, you need to modify the rate of serial port for some models of modems. 

Alarm Information


Handling Process

You can modify the rate of serial port through the menu of Solaris 10 Solaris Management Console (SMC). The steps are as follows:
1. Start SMC, and run the root#smc& command.
2. Modify the parameters device and hardware, and serial port through the graphical menu. Set baud rate to a required value, such as 9600 or 11520.
For details, see the attachment. 

Root Cause