No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


How to Clear the Board Alarms on the NE80E V300R002C06B325

Publication Date:  2012-07-27 Views:  87 Downloads:  0
Issue Description
When you pull the board out of the NE80E after pressing the OFL button or run the offline command to cut off the power, the equipment gives an alarm "LPU9 is pulled out". In fact, no board is inserted at slot 9 at the time. Although all services run normally, the alarm indicator on the master MPU is on. How to clear the alarm? 
Alarm Information
<r2>dis alarm all
Level        Date          Time             Info

Alert       08-07-08    23:37:50       LPU9 is pulled out
Handling Process
1. Run the following commands to clear the alarm:
[r2-hidecmd]clear alarm slot 9
<r2>dis al al
NO alarm
2. Clear the alarm by resetting the integrated equipment. 
Root Cause