After newly install the board of N2SL64 for the OSN3500, the alarm NO_BD_SOFT had occured as the parameter of the (HEX) 0x01 0x00 0x0d 0xff 0xff. After that try to initial NE and create the board again the alarm also occured.
NO_BD_SOFT had occured as the parameter of the (HEX) 0x01 0x00 0x0d 0xff 0xff.
First check for software inside the board N2SL64 by navigator. The command is ":sftm-show-dir:11,"/ofs1/hwx";". Then the software of basebios is missing so, use toolkit in order to reinstall the basebios software for N2SL64 board
The board is failed to verify the software and there are some missing software in the board so the board can not verify software.
Parameter for the N2SL64 board NO_BD_SOFT
---- 0x00 0x01 luboard.hwx
---- 0x00 0x02 fpga.pga
---- 0x00 0x03 update.pga
---- 0x00 0x81 ne.ini
---- 0x00 0x0d extbios.hwx