No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


AUX and EFI board report LAN-LOC alarm because ETH port without use have not configured as enable.

Publication Date:  2012-07-25 Views:  63 Downloads:  0
Issue Description
      AUX and EFI board on many subrack report LAN-LOC alarm of OSN6800 
Alarm Information
LAN-LOC alarm  
Handling Process
After configuring ETH port without use is disabale,LAN-LOC alarm disappear.
Root Cause
After configuring ETH port as enabale,SCC will check if the ETH ports are normal.
So when  ETH port without use is enabale, LAN-LOC alarm will appear.
OSN6800 have 5 ETH ports.
AUX have four ETH ports:ETH1,ETH2,NM ETH1,NM ETH2
EFI has one ETH port: ETH3
When LAN-LOC appear,please check if you configure ETH port without use as enable at first.   if it is enable, just need to disable it.