FAQ-What is purpose of electro-switch command in V800R006C02

Q:

Since customer in their network have lot of MA5600T which server as MSAN ( version of MA5600T is V800R06C02) and before every software installation, we need to set electro-switch, they ask us about purpose for this command. As main control board customer use only SCUB.

 

• To use VoIP feature on MA5600T we must set in any case electro-switch with index 1 to Location 0
• If we set electro-switch with index 1 to Location 0 and electro-switch with index 0 to Location 0 we can use as uplink ports from board 0/10 (0,1,2 and 3) and ports from board 0/20 (0,1 and 2), Uplink port on 0/19 board will not be available
• If we set electro-switch with index 1 to Location 0 and electro-switch with index 0 to Location 1 we can use as uplink ports from board 0/19 (0,1,2 and 3) and ports from board 0/20 (0,1 and 2), Uplink port on SCUB board will not be available
• If we set electro-switch with index 1 to Location 1 and electro-switch with index 0 to Location 1 we can use as uplink ports from board 0/19 (0,1,2 and 3) and ports from board 0/20 (0,1, 2 and 3), Uplink port on SCUB board will not be available as well as VoIP features