After the migration of the T2000R06 to the U2000V100R002C01SPC004, the LCAS of all the EFS0 in the network of the customer are not show in the Menu Configuration-Ethernet interface.
The EFS0 boards works woth the LCAS version 1, it was checked the file trans_ems.cfg and it was found that the LCAS version was not enabled.
#| LCASV1 switch. 0:unsupport, 1:support
LCAS = 0
It is necessary change the flag 0 to 1 to support the LCAS version and the nrestart U2000 server.
All the software version of the boards are okay according to the Matching Table of the current version of the NE.
It was checked by navigator that the LCAS function was enable for this board.
The LCAS are shown in other Ethernet boards like EGS2 and EGT2.
When a migration is done from T2000 to U2000, the flags of the file trans_ems.cfg need to be checked in order to continue with the same functions of the before NMS.