No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


U2000 can't Creating NEs because there are IPs conflict

Publication Date:  2012-07-25 Views:  325 Downloads:  0

Issue Description

During the swap project after links is up, U2000 can’t Creating new NEs

Alarm Information

There is no alarm appeared but operation of Creating NEs is fail
Massage appeared, No response the server is busy Error code 268435457

Handling Process

To check the IPs conflict between New NEs and old NEs at network
Querying the NEs Information Report using U2000
  1. Choose Inventory > Physical Inventory from the Main Menu.
  2. Select NE from Physical Inventory Type in the Physical Inventory window.
  3. Click Filter.
    In Filter window, set the NE type. Please select NE type window, select all NEs Click OK.
  4. The board information displayed in the Board List.
  5. Click OK. Then, you can save and archive the NEs information as Excel file.
After Create excel sheet has all IP at Network, it easy to check there IP conflict
There is sheet is creating to calculate is there is any conflict or no directly, it can used as swap night

Root Cause

 U2000 can’t create NEs because using at IP protocol at DCN management due to there is third-party equipment, there is no IPs plan

  • Try to Creating manually for one NE
  • Try to Creating NEs by Using the Search Method
The two ways have same massage and operation is fail,
Check IP at new NEs and all IP at our GW, there are some IP is conflicted
  • Change the NEs IP, with another IP not conflicted
  • Create new NEs again