No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ - How to commission CRP03 (forward Raman amplifier)

Publication Date:  2019-07-04 Views:  158 Downloads:  0

Issue Description

In the documentation it is explained how to adjust ON-OFF gain of SYS port for CRPC01 (backward Raman amplifier) by modifying optical power of pump groups 1 and 2, but it doesn't say anything about the case when it is needed to commission a CRPC03 (forward Raman amplifier).

Alarm Information

None

Handling Process

In Hedex there are recommended optical power values of Raman pump of different fibers:

Fiber Type                       P1 (Optical Power of Pump Group 1)           P2 (Optical Power of Pump Group 2)
G.652/G.655                                         +24.0 dBm                                                         +24.0 dBm
G.653                                                     +23.0 dBm                                                         +22.5 dBm

For CRPC03 just set the pump optical power to the recommended value depending on the fiber , it is not necessary to commission this Raman amplifier like CRPC01.

Root Cause

None

Suggestions

Always verify which type of external fiber is provided by customer. The optical power of pump groups depends on which type of fiber is going to be used.

END