1. When install U2000, There are a setting for customer to selecting which time slots is the default setting , In default, the setting for time slot mode is Sequential Mode (ITU-T), it is called as Huawei mode. if user select Interleaved as default, normally we call it Lucent mode. the selection during installing will be recorded in \U2000\server\conf\trans_ems.cfg.
2. In the NE Explore , customer can view the slot by different mode, the procedure is bellow:
In the NE Explorer, select an NE and choose Configuration > SDH Service Configuration from the
Function Tree. Modify the timeslot mode.
But customer can only view the different mode in single NE ,if cusomer open another NE explore, it will show
the default setting.