No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


2.15 TC-A2015 The T3500 Cannot Enter the OS Because the RAID Card Is Set to the Just Bundle of Disk Mode

Publication Date:  2012-07-18 Views:  300 Downloads:  0
Issue Description
Related information about the product and version: the T3500
Configure device A that is configured with the Areca RAID card by creating RAID 1 for the hard disks in slot a and b in device A and then install the OS in the two hard disks. Insert the two hard disks to device B that is also configured with Areca RAID card, but the OS cannot be started.
Alarm Information
Handling Process
Step 1     Set the BIOS boot sequence 1st Boot Device of device B to RAID CARD. For details, see 3.9 Setting the BIOS Of The T3500.                            
Step 2    
Set the RAID card to the RAID mode. For details, see 3.7 Starting the McBIOS RAID Manager.                             
Step 3    
Restart device B and the OS can be started. The fault is removed.


Root Cause
The BIOS boot sequence in device B is not set to RAID card start. Meanwhile, the RAID card is set to the JBOD mode rather than the RAID mode.