No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
Knowledge Base

How to Collect the Disk Concatenation Information on the VIS6000?

Publication Date:  2012-07-19  |   Views:  568  |   Downloads:  0  |   Author:  anliku  |   Document ID:  EKB1000007673

Contents

Issue Description

Similar to the database information of Huawei self-developed disk arrays, the disk concatenation information on the VIS6000 can be used to recover the disk configuration on the VIS6000. After the VIS project is implemented, the concatenation information must be collected and stored.

Alarm Information

None

Handling Process

Log in to the CLI on controllers A and B, run the following commands to collect the disk concatenation information:
  1. On controller A: VIS CLI:root>vxblnk deportto /OSM/config/sfA.tgz
  2. On controller B: VIS CLI:root>vxblnk deportto /OSM/config/sfB.tgz
sfA.tgz and sfB.tgz indicate the disk concatenation information.
 

Root Cause

None

Suggestions

None