No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


Error Information is Displayed When You Create the Disk Group on the CLI on the VIS

Publication Date:  2012-07-19 Views:  61 Downloads:  0
Issue Description
The execution of the vxdg init testdg sdx command on the CLI fails. The following information is displayed:
Not supported:“vxdg init testdg sdx”
Alarm Information
Handling Process
You can run the vxdg -s init testdg sdx command to create the share disk group on the CLI.
Root Cause
In normal user environments, the disk group on the VIS is shared. A disk group exclusive to only one host is not supported on the CLI. Therefore, the vxdg init testdg sdx command is sent as a string of characters without the disk group share parameter -s. The sf_agent client cannot detect the command.
The -s parameter must be included in the command to create the disk group on the CLI on the VIS6000, that is, you can only create the share disk group.