No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


How to Add a Third-Party NE to the VSM?

Publication Date:  2012-07-23 Views:  368 Downloads:  0

Issue Description

How to add a third-party NE to the VSM?

For information about fully supported NEs, see the Product Version Mapping Table.

Alarm Information


Handling Process

Step 1     Log in to the monitoring client on the VSM system. On the Process Monitor tab, right-click General Device Process and then choose Start The Process.

                                Step 2     Set the IP addresses of the VSM and the third-party NEs and ensure the IP connectivity between the VSM and the third-party NEs.

                                Step 3     Optional: Set the SNMP parameters on the SNMP NEs and ensure that the parameters are the same as those in the existing SNMP template of the VSM.

                                Step 4     Log in to the VSM client. In Main Topology, right-click and choose New > NE from the shortcut menu.

                                Step 5     In the object type tree of the dialog box that is displayed, choose ICMP Device or SNMP Device under the 3rd-Party branch.

                                Step 6     Configure the attributes of the NE.

l           The ICMP NE attributes are shown in the following figure.

l           The SNMP NE attributes are shown in the following figure.

 Step 7     Click OK.

Root Cause