Introduction to the USG5300 USB Automatic Upgrade Files
Publication Date: 2012-07-23Views: 47Downloads: 0
The USG5300 V100R003 has a new function, the USB automatic upgrade function. This case introduces the files required by the upgrade.
Use the text tool to edit the following content in the upgrade file: [UPGRADE INFO]: indicates the upgrade information. OPTION=AUTO: The value AUTO indicates that automatic upgrading is enabled, while the value MANU indicates that automatic upgrading is disabled. FILENUM=2: indicates the number of description modules used by the system for upgrade file resolution. The value is 1 or 2. [FILE DESCRIPTION] OPTION=OK: indicates whether an upgrade is needed. The value OK indicates that an upgrade is needed. The value NOK indicates that an upgrade is not needed. TYPE=SYSTEM-SOFTWAR: indicates the upgrade file type. The value SYSTEM-SOFTWARE indicates the system software. The value SYSTEM-CONFIG indicates a configuration file. DIRECTORY=DEFAULT: indicates the upgrade file directory. The value DEFAULT indicates that the upgrade file directory is the root directory. The value file indicates that the upgrade file directory is udisk0:/file. FILENAME=sup.bin: indicates the name of the file to be upgraded without the path.
[FILE DESCRIPTION] OPTION=OK: same as previous.
The autoupgrade.ini upgrade file, which is necessary for an automatic upgrade.
The system file, a file whose file extension is .bin.
The configuration file, a file whose file extension is .cfg or .zip.