No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Knowledge Base

Configuring an NE through Web Mode

Publication Date:  2019-07-05  |   Views:  584  |   Downloads:  0  |   Author:  Liumin001  |   Document ID:  EKB1000013114


Issue Description

If you fail to log in to the security NE in Web mode, right-click the security NEs, choose Repair Web User from the shortcut menu, and then re-log in to the security NEs individually.

Alarm Information


Handling Process

                                Step 1     Set the Telnet parameters of an NE.
1.         Select an added NE, right-click, and then choose Set NE Telnet/STelnet Parameter from the shortcut menu.
2.         In the Device Telnet/STelnet Parameter Management dialog box, set the parameters.
3.         Click Test.
A dialog box prompting the test result is displayed. Then click OK.
4.         After the test is successful, click OK.
                                Step 2     Right-click an NE in the Main Topology and choose Login Web from the shortcut menu.
After you log in to the Web browser, the Security LCT Browser tab is displayed.
                                Step 3     Configure details about the NE in the Web browser.

Follow-up Procedure
Manually synchronize configurations of NEs.
1.         Select an added NE, right-click, and then choose Data Synchronization from the shortcut menu.
2.         On the Data Synchronization tab, click Advance and then select the NE configurations to be synchronized.
3.         Click OK to return to the Data Synchronization tab.
4.         Click Synchronization to synchronize the NE configurations to the VSM.

Root Cause