No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FAQ: How to configure page push after setting USG2100 to cooperate with Secospace as a SACG?

Publication Date:  2012-09-11 Views:  551 Downloads:  0

Issue Description

When USG2100 was set to cooperate with Secospace as SACG, a problem about page push configuration often happened in many offices.
An example is as follow, the parameters could be changed according to cases.
P.S. The configuration is base on cooperation of SACG and Secospace.

Alarm Information


Handling Process

1. Configured a certificated url.
right-manager server-group
right-manager authentication url

2. Set a certificated server, ip address could be chosen the ip address of the port linked with PC (in fact, the ip addresses of other ports also could be chosen).
firewall authentication server http enable
firewall authentication server ip

3. Configured the security zone in the port linked with PC.
firewall zone trust
set priority 85
add interface Vlanif1
/* 3000 is the ACL number. Only push the message which match with ACL no.3000 */
firewall authentication session-based 3000 outzone

Root Cause