No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Knowledge Base

PPPOE dialing based on requirement, if there is no flow it will disconnect automatically

Publication Date:  2012-09-13  |   Views:  537  |   Downloads:  0  |   Author:  w00226954  |   Document ID:  EKB1000014635


Issue Description

 Customer surfs the Internet by duration-based charging, the customer requires it can automatic dialing everyday from 8:00a.m to 18:00p.m, this time, automatically disconnect after 18:00. 

Alarm Information


Handling Process

 time-range work 08:00 to 18:00daily         define time segment
acl number 2001
rule 5 permit
rule 10 permit time-range work    
           call the time defined
dialer-rule 1 acl 2001                                    call access list
interface Dialer1
link-protocol ppp
ppp pap local-user 19670204 password simple 87009276
ip address ppp-negotiate
dialer user 19670204
dialer bundle 1
dialer-group 1  
                                             call dialer-rule, must ensure that the parameter group-number in the command dialer-rule is same with the parameter group-number in the command dialer-group.
interface Ethernet0/0/0
pppoe-client dial-bundle-number 1 idle-timeout 30
    idle-timeout is timeout time (unit is second)
firewall zone trust
set priority 85
add interface Vlanif1

firewall zone untrust
set priority 5
add interface Ethernet0/0/0
add interface Dialer1
interface Vlanif1
ip address
firewall interzone trust untrust
packet-filter 2001 outbound
nat outbound 2001 interface Dialer1
ip route-static Dialer1

Root Cause