Issue Description
USG is OK, but if we run “display current-configuration” command there will come out error like this:
interface Ethernet1/0/7
portswitch
port link-type access
port access vlan 20
Assert at File: cfm_lib.c, Line: 7135. CallStack:
<-- 0x01a02c18(vos_assert)
<-- 0x01aa3b20(VOS_Assert_X)
<-- 0x00a14480(CFM_ShowCurrentBuildRunInfo)
<-- 0x00a001ec(CFM_CfgMsgProc)
<-- 0x00a662b8(CFG_SendCmdAndGetResponse)
<-- 0x00a86c14(CLI_MakeMsgPacket)
<-- 0x00a934cc(CLI_ProcessMatchedCmd)
<-- 0x00a94f08(CLI_CmdMatch)
<-- 0x00a97cf0(CLI_ExecuteCommand)
<-- 0x00a99648(CLI_CmdParse)
<-- 0x00ac5ae8(EXEC_Task)
<-- 0x01a198f8(tskAllTaskEntry)
<-- 0x02caffc0(vxTaskEntry)
<CpuID: 0, TaskID: 6, Sn: 24> [2011.07.22 10:29:31.100]
#
interface NULL0
#
firewall zone local
set priority 100
Handling Process
1.Format the SD card, and failed
2.Pull out the SD card and then reinsert it, run “display current-configuration” command again, the result will be OK
Root Cause
SD card is broken or poor contact
Suggestions
The problem often appears if SD card is poor contact, reset the SD card and try again
