No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


Verify,dispose or audit policy unsuccessful

Publication Date:  2012-09-19 Views:  103 Downloads:  0
Issue Description
Verify,dispose or audit policy unsuccessful,prompt that parses policy package did not found safety area,advise synchronize network element and check zone1 whether set priority or not
There take the case of safety area zone1
Alarm Information
Handling Process
Step 1 Reason 1 did not synchronize network element data
1 loging on client side VSM
2 choose configure>network security> policy management in main menu
3 double click policy package in this network element,enter centralize configuration window
4 in left navigation tree, right click this network element in network element configuration,choose synchronize network element data
5 operate policy audit again
If policy audit successful,problems solved
If not, please carry out step 2

Step 2 Reason 2 safety area used in policy package did not set priority
Handing Process
1 loging on client side VSM
2 choose view>main topology in main menu
3 right click in main topology interface choose find
4 choose ip address in find way,input network element ip address in find content
5 in find display list,right click network element,choose positioning topology
6 in main topology interface,right click positioned network element ,choose tools>Telnet
Input log user name and password,log on network element by telnet
7 carryout correlation comment,set priority of safety area zone1
If set priority already,the result of comment display this will display set priority x,x is the priority value of safety area zone1
If not,please set priority,for example carry out comment set priority security-priority,among them security-priority is the value of safety area
8 carry out data synchronize again,synchronize network element configure in network manager
9 carry out audit policy again
If audit policy successful,problem solved
If not ,please contact HuaweiSymentec technical support personal assist solve

Root Cause
 Reason 1 did not synchronize network element data

 Reason 2 safety area used in policy package did not set priority