No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Maintenance terminal connect VTL3500 through IPMI port, but cannot log on MegeRAID client

Publication Date:  2012-10-15 Views:  104 Downloads:  0
Issue Description
When deployment, connect VTL3500 to maintenance terminal through IPMI port. Input IP address in MegeRAID client and click update button, there is no reaction and cannot connect VTL.
Alarm Information
Handling Process
Connect VTL3500 to maintenance terminal with NIC1 network port, log on MegeRAID client normally to configure.
Root Cause
There are three network ports in VTL3500: PIMI, NIC1, NIC2, IPMI is management network port. Default IP is, it support access to VTL3500 with ISM interface;
When access and configure VTL3500 with MegaRAID client and VTL Console, it cannot use IPMI network port, and can only use NIC1, default IP address is

Maintenance terminal log on MegaRAID and VTL console to configure VTL3500 through NIC1 network port, and log on ISM and do configure through IPMI network port.