No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Knowledge Base

FAQ-How does S9300 view the remain power of each board and system

Publication Date:  2012-10-19  |   Views:  138  |   Downloads:  0  |   Author:  c00222574  |   Document ID:  EKB1000017619


Issue Description

How does S9300 view the remain power of each board and system

Alarm Information


Handling Process

<Quidway> display power system
The total power is :800.0(W)        //system total power
The used power is :376.2(W)        //used power
The remain power is :423.8(W)     //remain power
The system used power detail information :
SlotId    BoardName      State        Power(W)
   2       LE02G48TA      On           64.4     //power of board
   5       LE02G24SA      On           26.0
   8       LE02X2UXA      On           57.0
   13      LE02SRUA       On           99.9
   14      LE02SRUA       On           99.9
   15      LE02CMUA       On           5.0
   17      FAN board      On           6.0
   18      FAN board      On           6.0
   19      FAN board      On           6.0
   20      FAN board      On           6.0
   23      PWR board      On           800.0

Root Cause



When system install or expand capacity, you can judge whether it need power capacity expansion according to current device power using situation.