No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FAQ-How to configure S9300 switch outbound and inbound speed limiting of interface

Publication Date:  2012-10-23 Views:  495 Downloads:  0
Issue Description
In the process of S9300 replacing S8505, parts of original S8505 users access by 100M Ethernet interface, site used force 10M to limit user’s bandwith, this configuration way displays failure, how to correctly configure after cutting over to S9300?
Alarm Information
Handling Process

1. Inbound speed limiting process
(1) Creat QoS CAR templet (optional parameters by default);
(2) Apply QoS CAR templet on interface.
qos car 10m cir 1024
2. Outbound speed limiting process
Configure interface shaping speed on the interface (CBS by default configuration):
qos lr cir 10240
complete configuration is as follows:
qos car 10m cir 10240 cbs 1925120
interface GigabitEthernet1/0/3
qos lr cir 10240 cbs 1280000 outbound
qos car inbound 10m
Root Cause