No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Peer vendor’s equipment H3C MSR diversion configuration reference

Publication Date:  2012-10-29 Views:  156 Downloads:  0
Issue Description
In the implementation process of TSM project, we often need to configure the third party equipment, so that diverse the flow of the core switch equipment to SACG. This case takes H3C MSR equipment for example, through the examples to explain how to configure the diversion of the equipment.
Alarm Information
Handling Process
1, create sub interface and the corresponding Vlan
[MSR] interface ethernet 1/1.250
[MSR-Ethernet1/1.1] vlan-type dot1q vid 3001
[MSR-Ethernet1/1.1] quit

[MSR] interface ethernet 1/1.251
[MSR-Ethernet1/1.1] vlan-type dot1q vid 3002
[MSR-Ethernet1/1.1] quit

2, create policy-based routing
[MSR] policy-based-route tsm permit node 5
[MSR-pbr-tsm-5] if-match acl 3100
[MSR-pbr-tsm-5] apply ip-address next-hop
The IP address is the SACG flow ingest IP address.
[MSR-pbr-tsm-5] quit

3, apply the policy-based routing in the user side interface
[MSR] interface GigabitEthernet 5/1
[MSR] ip policy-based-route tsm
Root Cause