No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Knowledge Base

FAQ-What is the notice matters for S9300 flow control cofiguration

Publication Date:  2012-10-30  |   Views:  164  |   Downloads:  0  |   Author:  c00222574  |   Document ID:  EKB1000018711


Issue Description

What is the notice matters for S9300 flow control cofiguration?

Alarm Information


Handling Process

1)、S9300 flow control is divided to broadcast  flow control , multicast  flow control and unknown unicast flow control,their flow control realization is same.
2)、S9300 flow control contains 3 kinds of mode:Flow control base packet rete. Flow control base bit rate.Flow control base percent.
Broadcast flow was flow controlled base 50% packet rete by default, Broadcast flow and unknow unicast do not enable control function defautly.
3)、Control function under ports is corresponded for one kind of packet,Open ports broadcast  packet  control function,only make broadcast  packet control. Open ports multicast  packet  control function,only make multicast  packet control . Open ports unknow unicast  packet  control function,only make unknow unicast  packet  control , it can configure 3 kinds of control at the same time.
4)、The same interface cannot configure flow control base packet and bit. For instance, some interface has configured multicast flow control base bit, it cannot configure broadcast  flow control base packet rate
5)、It only supports ports lever flow control, and it only supports make flow control on inbound interface.

Root Cause