No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Knowledge Base

FAQ-The notice matters for S9300 far distance mirroring

Publication Date:  2019-07-20  |   Views:  602  |   Downloads:  0  |   Author:  c00222574  |   Document ID:  EKB1000018721


Issue Description

The notice matters for S9300 far distance mirroring

Alarm Information


Handling Process

1. V100R001 and V100R002 version of S9300 support far distance mirroring, and they support striding layer 3 or layer 2 far distance mirroring.
2. striding layer 3 mirroring, view interface must be the enhance type board.
3. The packet will be encapsulated to GRE packets after S9300 configured far distance mirroring, it can get GRE packet head by packet getting tools, but the data encapsulated in GRE cannot be identified, it need special software to identify.
4. If it wants to get packets with label, it needs to configure, configuration command is as follows:
[Quidway]observe-port 1 interface GigabitEthernet 1/0/0 destination-ip source-ip vlan xx 

Root Cause