USG5500-the configuration of master can't automatically synchronize to the slave.
One, first to check whether firewall configuration have problem?
Second, if configuration has no problem, can according to the following operation to make sure the active/standby firewall configuration is consistent:
1、In the active/standby FW respectively execute undo hrp auto-sync config
2、In the slave delete the configuration need synchronize. Such as nat server configuration:
undo nat server 1
undo nat server 13
3、In the active/standby FW respectively execute hrp auto-sync config
4、In the active/standby FW user view execute hrp sync config，synchronize the master configuration to the slave:
HRP_M hrp sync config
maybe because the FW is configured when stand-alone, the configuration between master and slave is inconsistent. The firewall HRP automatic synchronization configuration function is open by default, after forming double machine, this part of the configuration cannot be synchronized, only the new master configuration command in the two-node cluster state can synchronize.