No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


FAQ- USG50 PPPoE client configuration

Publication Date:  2012-11-07 Views:  74 Downloads:  0
Issue Description
Networking:PC(one hundred sets)---Switch---USG50(PPPoE Client)---ADSL Modem---Router (PPPoE server),the computer of Ethernet connects USG50,USG50 works as PPPoE Client,router works as PPPoE Server。The whole accessing internet process can be realized without installing PPPoE client dialing software in PC.
Alarm Information
Handling Process
USG50 configuration is mainly divided into two parts: the one is PPPoE, the other is NAT.
PPPoE configuration:
1、 interface Dialer1,configure dialing interface.
2、link-protocol ppp,link protocol.
3、ppp pap local-user huawei password simple huawei123 ,authentication mode and user passward.
4、dialer user mypppoe,configure the remote user name of the interface.
5、ip address ppp-negotiate,configure the interface through consulting acquire IP address.
6、dialer bundle 1,configure the interface’s Dialer Bundle。
7、dialer-group 1,configure the interface’s Dialer Group。
8、interface Ethernet0/0/0                      
pppoe-client dial-bundle-number 1 ,binding the logic interface with actual interface。
9、add the logic interface into corresponding area.
10、pppoe-client dial-bundle-number 1,configure dialing.
Notice: must open the rules between Local and Untrust domain.
NAT configuration:
The dialing connection IP is depended on consulting, can’t confirm the NAT address pool. The low end equipment can configure the NAT Outbound in the interface of the equipment. The configuration is “nat outbound 2001 interface Dialer1”.
Root Cause