Issue Description
i have two S5700Li switches and i want to do the stack
[ACC-SW-1]stack port interface Gigabit Ethernet 0/0/49 enable
Warning: Enabling stack port may cause configuration loss on the interface, continue?[Y/N]Y
Error:The port is not allowed to enable to stack port.
[ACC-SW-1]
this is the issue
how should i resolve it
Alarm Information
Error:The port is not allowed to enable to stack port.
Handling Process
Reconnect the stack cables correctly
Kindly note that
PCI-E cables are used for stacking switches using stack cards.
SFP+ cables are used for stacking switches using service ports
Root Cause
After I checked I found this error.
<ACC-SW-1> display stack-port membership
stack-port0/1 has 0 ports
---------------------------------------------
stack-port0/2 has 0 ports
This mean the stack cables are incorrectly connected.
