Use the Cascaded VPM210s ,remote side can't hear the voice
After checking the cables, all the cables were working fine.
And also the cables connented well.
But the mode of the MIC ID is wrong, how to set the MIC ID.The right indicator is on, MIC ID is 1.The left indicator is on, MIC ID is 2.Both the left and right indicators are on, MIC ID is 3.
The remote still can't hear the voice , need to check the terminal's configuration. Choose Settings > Audio > Audio Input, and then set the Cascading mode of the microphone arrays to Horizontal or Vertical.
There are the pictures for Cascading mode of the microphone arrays to Horizontal and Vertical.
The cables are faulty.
The cables are losse or disconnected.
Mode of the MIC ID is incorrect.
Cascading mode on termial is wrong.
The MIC ID is the most important thing need to check.