No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FAQ-How Do I Configure a Static ARP Entry?

Publication Date:  2014-09-15 Views:  3003 Downloads:  0

Issue Description

FAQ-How Do I Configure a Static ARP Entry?

Alarm Information

None

Handling Process

FAQ-How Do I Configure a Static ARP Entry?

You can run the arp static command to configure a static ARP entry in which the mapping between an IP address and a MAC address is fixed.
  1. If the outbound interface is a Layer 3 physical or Eth-Trunk interface, run the arp static ip-address mac-address command to configure a static ARP entry.
  2. If the outbound interface is a VLANIF interface, Dot1q termination sub-interface, or QinQ termination sub-interface, run the arp static ip-address mac-address [ vid vlan-id [ cevid ce-vid ] interface interface-type interface-number ] command to configure a static ARP entry.
  3. If the outbound interface is bound to a VPN instance:
  • If the outbound interface is a Layer 3 physical or Eth-Trunk interface, run the arp static ip-address mac-address vpn-instance vpn-instance-name command to configure a static ARP entry.
  • If the outbound interface is a VLANIF interface, Dot1q termination sub-interface, or QinQ termination sub-interface, run the arp static ip-address mac-address [ vid vlan-id [ cevid ce-vid ] interface interface-type interface-number ] command to configure a static ARP entry.

Root Cause

None

Suggestions

None

END