How to login other board with SOL.
On the MM910 CLI, run "smmget -l smm -d solenable" to check whether the SOL of the MM910 is enable. If the command output is "SOL is disable", run “smmset -l smm -d solenable -v enable”, then reboot MM910.
You can run the telnet 0 1101 command to access the SOL CLI from the MM910 CLI.
The sequence numbers in the preceding information are described as follows:
1-32 indicate the compute nodes in slots 1 to 32 respectively.
33-36 indicate the switch modules in slots 1E, 2X, 3X, and 4E respectively.
You can press Ctrl+R to return to the CLI for selecting a slot in the chassis and press ctrl+r twice to log out of the SOL CLI.