Alarms indicating storage pool failures are reported after the FusionCube system is power cycled.
ALM-51003 Storage Resource Pool Fault and ALM-51023 Failure to Restore VBS Metadata
1. Log in to the FusionManager portal and check whether the status of FusionStorage is Normal.
2. Check whether the status of all hard disks on all storage nodes is normal and whether the number of storage nodes is correct.
If yes, manually clear the alarms.
If no, contact Huawei technical support.
If the FusionCube system is powered off, ALM-51003 Storage Resource Pool Fault and ALM-51023 Failure to Restore VBS Metadata are generated and cannot be automatically cleared after the system is powered on.