No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionComputer R3C0 one of CNA node is faulty status and no bootable device

Publication Date:  2014-09-30 Views:  836 Downloads:  0

Issue Description

One of the CNA node turned to be faulty status and when login from BMC remote control, we can see "no bootable device"


Alarm Information

System will auto reboot for there is no bootable device

Handling Process

If we received the "no bootable device" information when operating system start, there are below possible causes:

1, the boot priority has been changed.
2, the boot information was lost.
3, the disk or the raid controller is faulty.

so firstly ,check the boot priority in BIOS, and we found that the first priority boot is network, and not hard drive. 

then change the first boot priority to be hard drive and reboot the server, problem fixed.

Root Cause

Customer changed the boot priority and operating can't start. 

Solution

change the first boot priority to be hard drive and reboot the server

Suggestions


END