No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FAQ- How to replace the Dome Camera

Publication Date:  2014-10-29 Views:  541 Downloads:  0

Issue Description

 How to replace the Dome Camera?


1) Loosen the screws that secure the dome camera to the base using a screwdriver, and separate the dome camera from the base by rotating it clockwise, as shown in below Figure .

2) Disconnect the network cable and remove the dome camera from the base.

3) Install a new dome camera and reinstall the network cable.

4) Align the dome camera with the base and rotate it anticlockwise, as shown in below Figure .

5) Align the screws with the holes and then tighten them.