No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FAQ-Compressor suction pressure is too low or liquid returns, what should be done

Publication Date:  2014-10-29 Views:  1758 Downloads:  0

Issue Description

Compressor suction pressure is too low or liquid returns, what should be done?


1) If refrigerant filled is insufficient, please add refrigerant.

2) If indoor temperature is set too low, please set it higher.

3) If filters are clogged with dirt, please replace the filters.

4) If superheat degree that is set with the thermostatic expansion valve is inappropriate, please adjust the thermostatic expansion valve to an optimal degree.

5) If sensing bulb is disconnected from the thermostatic expansion valve, please reinstall the thermostatic expansion valve.

6) If external excess pressure is too high, and air decreases because of obstruction in air duct, please clean them.

7) If condensing pressure is too low, please repair condenser.

8) If air duct is uneven due to inappropriate design, please re-design and change the air duct.