No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Knowledge Base

NTP Configuration

Publication Date:  2014-11-10  |   Views:  220  |   Downloads:  0  |   Author:  SU1001716911  |   Document ID:  EKB1000059495


Issue Description

NTP configuration 

Handling Process

checked the time on IP-Phones and tehre is no syncronization btween them because the NTP is not configured

Root Cause

NTP was not configured before


1-Config the system time :
                [config system date <yyyy-mm-dd> time <hh:mm:ss> ]
2-try to add the following command
[configure SNTPserver port 123 ]
   After configure, use command [ start SNTPserver ]
3-Adjust the time zone on the IP phone and check the time on he IP-Phone.


check the time on the IP-Phones