No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RH2288 V2 , error: NO bootable device

Publication Date:  2014-12-29 Views:  633 Downloads:  0

Issue Description

server type : RH2288 V2
Fault Symptom :after customer finished OS installation , he found that OS can not boot normally and he get this error : No bootable device 

Alarm Information

alarm :

Handling Process

Handling process :
--------------------------
1- check OS installed on which Drive Group .
2- check wether this Drive Group is set as Boot Drive or not .

Root Cause

Root Cause :
-----------------
OS was installed on Drive Group 1 (VD1) and this Drive Group was not set as a Boot Drive.

Solution

Solution :
-------------
problem solved and OS can boot normally after setting Drive Group 1 (VD1) as a Boot Drive

Steps for setting Drive Group 1 (VD1) as a Boot Drive :
---------------------------------------------------------------
1-  Reboot Server and press CTRL+H to open RAID console.
2-  select Virtual Drives


3- sett Drive Group 1 (VD1) as a Boot Drive


4- click on GO after that reboot server , then OS booted normally


Suggestions

none

END