No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


CH222 blade server LSI SAS 2208 error“Native Configuration no longer supported”occurred

Publication Date:  2015-03-11 Views:  332 Downloads:  0

Issue Description

After swap the raid controller of a server, user received the message “Native Configuration no longer supported” when start the server. as showing in below picture:


Alarm Information

Native Configuration no longer supported

Handling Process

1, Press Ctrl+Y to enter the MegaCli page

2,  then input “-adpnvram –clear –a0”  as showing in below picture:

3,  if we received above screen, that means the NvRam has been cleared and then we just need reboot the system.

Root Cause

if the raid contorller has been used in other server or platform, we will receive this message and need clear the NvRam


Clear the NvRam with the step in the handling process


if user has already configured the raid for the disk, the command “-adpnvram –clear –a0”may fail. In this case, we need plug out the disk first and then issue command.