No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FAQ-How Do I Configure Port Isolation

Publication Date:  2015-03-25 Views:  3966 Downloads:  0

Issue Description

How Do I Configure Port Isolation?


The port isolation feature isolates interfaces in a VLAN. To configure port isolation, run the port-isolate enable [ group group-id ] command in the interface view. For example, configure port isolation on GigabitEthernet1/0/1:

[Quidway] interface gigabitethernet1/0/1
[Quidway-GigabitEthernet1/0/1] port-isolate enable

To configure unidirectional port isolation, run the am isolate { interface-type interface-number }&<1-8> or am isolate interface-type interface-number1 [ to interface-number2 ] command in the interface view. For example, configure unidirectional isolation on GigabitEthernet1/0/1 and GigabitEthernet1/0/2:

[Quidway] interface gigabitethernet 1/0/1
[Quidway-GigabitEthernet1/0/1] am isolate gigabitethernet 1/0/2