No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FAQ-How Do I Set the Delay for Re-applying a Routing Policy

Publication Date:  2019-07-04 Views:  509 Downloads:  0

Issue Description

How Do I Set the Delay for Re-applying a Routing Policy?


The AR150&AR160&AR200&AR1200&AR2200&AR3200 provides the following rules for processing changes of a routing policy:

After the command used to configure the routing policy changes, the RM module immediately notifies protocols of the change by default. You can run the route-policy-change notify-delay delay-time command to set the delay when the AR150&AR160&AR200&AR1200&AR2200&AR3200 notifies protocols of re-applying a routing policy after the routing policy changes. The routing policy is re-applied after the delay.
  • If the configuration of the routing policy changes again during the delay, the RM module resets the timer.
  • If the routing policy is referenced by BGP, you can also run the refresh bgp all command to trigger BGP to apply the routing policy immediately during the delay.