1. Log in to the IPC web page as the admin user.
For the default password of the admin user, see the user guide for the camera model.
This case uses the web page of IPC 5811-WD-Z20 as an example. For the setting method of other camera models, see the corresponding user guide.
2. Choose Settings > Channel Configuration > ISP Parameters.
The ISP Parameter page shown in Figure 5-3 is displayed.
Figure 5-3 ISP Parameters page
3. Set Day/Night mode to Automatic.
4. Set Day/Night sensitivity to a smaller value.
The Day/Night sensitivity parameter can be set only after Day/Night mode is set to Automatic. A higher sensitivity indicates easier B/W-to-color switch.