No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FAQ--- In USG 5300 Why the same alarm but with different alarm format

Publication Date:  2015-06-30 Views:  92 Downloads:  0
Issue Description

In eLog server ,there are 2 alarms appeared ,see as below :

2015-04-01 23:29:14 MEX HWCM/4/TRAP: configure changed: EventIndex=503,CommandSource=1,ConfigSource=3,ConfigDestination=2

2015-04-01 23:29:14 MEX %%01HWCM/4/TRAPLOG(l): configure changed:  EventIndex=503,CommandSource=1,ConfigSource=3,ConfigDestination=2.

The second one  is with  symbol “ %% “,but the first is  not ,both the alarms are about configuration change ,but why their format are different .


Actually they are different alarms :


the first one is trap alarms ,that means the message will be sent only after the “ snmp trap “  command is configured ,

For the second one , it is TRAPLOG (or syslog),after configuring the  “info-center loghost “ it can be displayed in eLog .


Alarm Message Format :



Log Message Format :