No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Knowledge Base

FAQ-How Can I Resolve the Error "E2111 SBE log disabled on DIMM B3,Reseat DIMM" that Is Reported on the VTL6000 Front Panel

Publication Date:  2015-08-05  |   Views:  5396  |   Downloads:  0  |   Document ID:  EKB1000083660


Issue Description

How can I resolve the Error E2111 SBE log disabled on DIMM B3,Reseat DIMM that is reported on the VTL6000 front panel.


Product and version information: VTL6000 V100R003C02

The error is caused by an exception of B3 memory module on the VTL6000 engine. The solution is as follows:

1.  Remove the power module. Wait two minutes and insert the power module. Check whether the error is rectified. If no, go to 2.

2.  For details about how to replace B3 memory module, see Replacing a Memory Module in the OceanStor VTL6000 Virtual Tape Library V100R003C02 Troubleshooting.